Skip to content 
There are many variations of 25 L jerry-can lines on the market, but most of them still run longer time cycles and leave 8 % flash waste. If you are going to invest in a new line, you need to be sure there isn’t any hidden cost for extra operators or downstream leak-test failures. All the “cheap” quotations on the Internet tend to forget servo hydraulics or Moog parison control, making your ROI longer than 18 months. Our ZEKI-25L is the first true German-technology line built in China, using a German technolgy accumulator head combined with KEBA system.
There are many variations of 25 L machines available, but the majority suffer from old hydraulic packs or randomised Chinese PLCs which don’t look even slightly reliable. If you are going to run UN 3H1/Y1.5 fuel cans, you need to be sure.
There are many variations of 25 L lines available, but the majority have suffered high scrap rates which don’t look even slightly acceptable. If you are going to use a high-speed dual-head layout, you need to be sure there isn’t anything embarrassing like 1 % leak failures hidden in the middle of the production report. All the low-price generators on the Internet tend to skip automatic deflashing or in-mold labelling, making this the first true full-automatic line on the market. It uses a 100-point Moog parison programmer, combined with a servo-hydraulic power pack, giving 128 pcs/h per cavity. The generated output is therefore always free from repetitive flash or injected waste, ensuring there isn’t anything embarrassing hidden in the middle of the shift. All the other 25 L lines on the Internet tend to repeat predefined old hydraulic circuits.
There are many variations of 25 L jerry-can lines available, but the majority have suffered alteration in some form.
